|
2005-10 6 SPEED TRANSMISSION CONVERSION
BA24 $3995.00
Kit includes 6-Speed Transmission rated @ 700 HP, Triple, Double
Synchronizers, 26T Input Shaft, Hydraulic Throw Out Bearing, Short Throw Shifter with Lever and Knob, Inner and Outer Shifter Boots, Crossmember, 1-Piece 3 1/2” Aluminum
Driveshaft. This Kit requires a 26T Clutch Disc. Kit is a true bolt-in kit, no fabrication is required.
|
 |
|
TRI-AX SHIFTER GT
555-7305 $322.95 
The newest Tri-Ax Shifter is designed expressly for the S197 Ford Mustang GT, with a style that is reminiscent of the venerable "Top Loader". Precise action, stop-bolts to prevent damage to the transmission and linkage under hard usage, our two-position handle height, and internal spring tension to assist you in never missing 3rd gear!
|
 |
|
|
TRI-AX
REMOTE RACING SHIFTER
555-7321 $660.95
The Tri-Ax Shifter is designed expressly for the S197 Ford Mustang GT running a Tremec 500/600 Transmission. It keeps the shifter in the stock location and is fully adjust in length and height.
|
 |
|
2010 MUSTANG GT SHORT THROW SHIFTER
M-7210-MGTA 2010 $325.00
• Designed by Ford Racing and Hurst
• Teflon bearing with unique shifter rod and OE
main stamping
• Chrome stick "Ford Racing" white shift knob
• Includes jam nut and shifter boot
• Urethane body vibration isolators
• Reduced throw
|
 |
|
2005-2009 MUSTANG GT SHORT THROW SHIFTER
M-7210-MGT 2005-2009 $315.00
• Designed by Ford Racing and Hurst
• Teflon bearing with unique shifter rod and OE
main stamping
• Chrome stick "Ford Racing" white shift knob
• Includes jam nut
• Urethane body vibration isolators
• Reduced throw |
 |
|
2005-2010 MUSTANG FORD RACING SHIFTER
SERVICE KIT
M-7211-A $78.95

• Service kit for Ford Racing 2005-2010 Mustang
GT and V6 5-speed short throw shifters:
• 2005-2010 Mustang GT
• 2005-2010 Mustang V6
• Kit includes stalk with Teflon bearing and
parts to reassemble
• Does not fit production shifter |
 |
|
MODULAR BELLHOUSING INSTALLATION KIT
M-7771-A $29.00
• Kit includes:
• 1 clutch ball stud
• 7 bellhousing-to-block bolts
• 2 starter-index-plate-to-bellhousing
bolts |
 |
|
EXEDY TWIN PLATE RACING CLUTCH
ET01SD 8-bolt flywheel $2304.95
Twin-disc clutch kit for high horsepower 4.6 3V Mustangs. 1000 lb-ft torque capacity. Includes lightweight chrome moly steel flywheel, forged aluminum cover, ventilated plates, and spring dampened discs to protect the driveline.
|
 |
|
2007 SVT MUSTANG COBRA CLUTCH AND FLYWHEEL ASSEMBLY
M-7060-A54 $999.00
Kit contains 26 spline dual disc clutch, pressure plate, pressure plate attaching bolts and flywheel. Original equipment on 2007-08 Shelby GT500.
|
 |
|
RAM CLUTCHES PERFORMANCE CLUTCH
98952HD - 10 SPLINE $498.95 
98952HDT - 26 SPLINE $498.95 
Ram performance clutches are an affordable performance clutch for moderately modified mustangs. Clutch is a direct replacement for the 3V, utilizing the stock hydraulic TO bearing (not included). Available as stock 10 spline, or 26 spline for performance transmissions.
|
 |
|
PILOT BEARING
7600-1 11.95 
Stock replacement pilot bearing for the 3V mustang. |
 |
|
4.6L MANUAL FLYWHEEL BOLTS
M-6379-B $11.95
Fits 4.6L modular engines with manual transmission flywheels. M10x1x26.5 bolt.
Package of 8. |
 |
|
ARP FLYWHEEL BOLTS
254-2801 $40.95 
Top quality high performance flywheel bolts, 200,000 psi tensile strength. Package of 8. |
 |
|
11" CLUTCH BOLT KIT
M-6397-A46 $14.95
Includes pressure plate bolts and dowel pins for use with 11" modular flywheel. |
 |
|
RING
GEAR & PINION SETS
Improve the accelleration of your Mustang and improve yor quarter mile times with these ring and pinion kits
PART NO. RATIO AXLE
M-4209-F373N 3.73:1 8.8 $179.95

M-4209-G410A 4.10:1 8.8 $179.95
|
 |
|
8.8 RING & PINION INSTALLATION KIT
M-4210-B $89.95
Kit includes pinion and carrier bearings, ring gear bolts, pinion seal, crush collar, pinion nut, pinion and carrier shims. |
 |
|
8.8”
TRACTION-LOK LIMITED SLIP
DIFFERENTIAL
M-4204-F318C $299.00
• 8.8" differential
• Fits 31 spline axles
• Carbon fiber clutch plates for increased durability
• Original equipment in 2003-04 Mustang Cobra
|
 |
|
8.8” T-2 TORSEN DIFFERENTIAL
M-4204-T31 $589.00
• 8.8" differential
• Torsen T-2 type differential
• Features full time torque-sensing, torque-biasing.
|
 |
|
8.8”
TRACTION-LOK REBUILD KIT WITH CARBON DISCS
M-4700-C $128.95
• Kit includes carbon fiber clutch pack, shims, S-spring
and instruction sheet.
• Fits all 8.8" Traction-Lok differentials.
• Carbon fiber discs designed for higher torque usage.
• Used in 2003-08 SVT Mustangs. |
 |
|
2005 - 08 MUSTANG DRIVE SHAFT LOOPS KIT
M-5478-S197B $115.00
• Bolts to floor pan 2005 - 08 Mustang GT.
• Zinc plated to resist corrosion
• Includes hardware
• Includes front and rear loops for production two-piece
driveshaft.
|
 |
|
COBRA JET DRIVESHAFT LOOP
M-5478-CJ $139.00
• Service replacement for the Mustang FR500CJ
race car
• Meets most drag racing sanctioning body
requirements
• Contains driveshaft in the event of front
U-joint breakage
• Fits 2005-2009 Mustang with TR6060
transmission and M-7210-B Shifter
• For use with one piece driveshafts only
|
 |
|
MANUAL TRANSMISSION FLYWHEEL MODULAR
ENGINE 11" 8 BOLT
M-6375-J46A
• Nodular Iron Material
• 164 Tooth Ring Gear
• Used in M-7060-C46. Works with an 11" clutch
|
 |
|
MANUAL TRANSMISSION FLYWHEEL STEEL
157T 28.2
M-6375-A302B $255.00

• Billet Steel Material
• 157 Tooth Ring Gear
• Pre-1981 302 engines and 351 engines using
157T flywheel. Meets SFI 1.1
|
|
|