LINE CARD

This is only a partial list of the manufacturers we distribute for. Click here for more. 

 
Proudly Canadian

Sean Hyland Motorsport is located in Woodstock, Ontario, Canada. 

Terms and Conditions

- New 2007 Windsor Iron Block
- NEW Forged Steel Crankshaft
- Manley H Beam Connecting Rods
- Manley Forged Pistons (2618 high strength material)
- HD Plasma Moly Steel Piston Rings
- ARP Main and Head Bolts
- FM Main and Rod Bearings
- New PI Windsor Cylinder Heads
- Fully assembled longblock, w/cams, updated timing components, updated timing chains
- Cast aluminum valve covers, timing cover, oil pan
- Oil pump w/Pick Up Tube

Optional Components
- Manley Billet CNC I Beam Rods - $800
- Billet Trigger Wheel - $90
- Stainless Valves, Beehive Springs, Steel Retainers - $1095
- Mag-Bronze Valve Guides - $250

- New 2004 Windsor Iron Block
- 700 HP capable
- Forged Steel 5.4L Crankshaft
- Manley H Beam Connecting Rods
- Manley Forged Pistons (2618 high strength material)
- HD Plasma Moly Steel Piston Rings
- ARP Main Bolts
- FM Main and Rod Bearings

Optional Components
- HO Oil Pump w/Pick Up Tube, Billet Oil Pump Gears - $350
- Dowels, Pins, Rear Cover and oil seal - $120
- Manley Billet CNC I Beam Rods (1200HP)- $800
- SHM/Manley 300M Billet CNC I Beam Race Rods (1600HP)- $1600
- Race Bearings - $80

- New 2007 Windsor Iron Block
- NEW Forged Steel Crankshaft
- Manley H Beam Connecting Rods
- Manley Forged Pistons (2618 high strength material)
- HD Plasma Moly Steel Piston Rings
- ARP Main and Head Bolts
- FM Main and Rod Bearings
- CNC Ported heads, Beehive Springs, Stainless Intake Valves, Inconel Exhaust Valves
- Comp Cams Billet Camshafts
- New VCT timing components, latest revisions
- Powder coated valve covers
- Timing cover, oil pan
- Oil pump w/Pick Up Tube

Optional Components

- Manley Billet CNC I Beam Rods - $800
- Billet Trigger Wheel - $90
- Stainless Valves, Beehive Springs, Steel Retainers - $1095
- Mag-Bronze Valve Guides - $250

KENNE BELL TWIN SCREW SUPERCHARGER UPGRADE FOR 1999-2004 LIGHTNING
TS3002 Supercharger Kit .$3699.00 + Freight
SC3152 Additional Pulley (specify boost when ordering) $70.95

Bolt on an easy 96+HP with a Kenne Bell Supercharger Upgrade. The Twin Screw blower enjoys several key performance advantages over the Roots-style blower: higher boost potential (up to 22 psi), lower parasitic losses (-14HP at 9.3 psi) and reduced air charge temperatures (-65° at 9.3 psi). And it's boost adjustable from 9.3-22 psi for any street or track combination. Kit includes billet bypass valve, all hardware, and tuning instructions.

1999-2000 LIGHTNING SUPERCHARGER UPGRADE KIT
M-6066-L90 BLACK WRINKLE FINISH...............$4049.99 + Freight
M-6066-L90P POLISHED FINISH .......................$4429.99 + Freight

• Fits 1999-2000 F-150 Lightning
• Complete kit contains all hardware and detailed instructions
• Premium fuel only
• Designed for use with factory twin bore throttle body
• 90mm mass air meter
• Due to multiple calibrations, online registration is required to receive Pro-Cal tool after purchase
• Pro-Cal tool voucher included with kit
• Simple bolt-on increase of approximately 80 horsepower and 80 ft./lbs. of torque

2001-2004 LIGHTING SUPERCHARGER UPGRADE KIT
M-6066-LR Black $3999.99 + Freight
M-6066-LRP Polished $4389.99 + Freight

• Fits 2001-2004 F-150 Lightning
• Complete kit contains all hardware and detailed instructions
• Premium fuel only
• Designed for use with factory twin bore throttle body
• Due to multiple calibrations, online registration is required to receive Pro-Cal tool after purchase
• Pro-Cal tool voucher included with kit
• Simple bolt-on increase of approximately 80 horsepower and 80 ft./lbs. of torque

• Fits all 2005-2008 F-150 with 5.4L 3-valve engine
• Complete kit contains all hardware and detailed instructions
• Intercooled system
• Black wrinkle finish
• Premium fuel only
• Designed for use with factory throttle body
• 95mm mass air meter
• Pro-Cal voucher included in kit
• Simple bolt-on rear wheel increase of approximately 160 horsepower and 160 ft./lbs. of torque

• Fits 2010 F-150 Raptor
• Charcoal grey painted finish with machined tip
• 6-lug, 135mm bolt circle
• 6.16" backspacing
• 34 mm offset
• 17" x 8.5" wide
• Includes Ford Racing Center cap
• Requires stem-mounted Sensor 9L3Z-1A189-A Tire Pressure Monitoring System

• Fits 2010 F-150 Raptor
• Black painted finish with machined tip
• 6-lug, 135mm bolt circle
• 6.16" backspacing
• 34 mm offset
• 17" x 8.5" wide
• Includes Ford Racing Center cap
• Requires stem-mounted Sensor 9L3Z-1A189-A Tire Pressure Monitoring System

6" & 8"ROUND AUXILIARY HALOGEN LIGHTS
M-15200-F15R6HAL - 6"
M-15200-F15R8HAL - 8"

• Black powdercoated
• 100-watt halogen bulbs
• Matching black ABS stone guards
• Four lights per kit
• Two long-range and two driving lights
• Light Bar sold separately
• FOR OFF-ROAD USE ONLY!
NOTE: Displayed with M-15266-F15RBAR (sold separately).

• Black powdercoated
• 35 watt HD
• Matching black ABS stone guards
• Four lights per kit
• Two long-range and two driving lights
• Light Bar sold separately
• FOR OFF-ROAD USE ONLY!
NOTE: Displayed with M-15266-F15RBAR (sold separately).

2010 F-150 SVT RAPTOR FRONT AUXILIARY LIGHT BAR
M-15266-F15RBAR

• Fits 2010 F-150 SVT Raptor
• Made from 1-3/4" OD, .120 wall steel tubing
• Comes with light tabs for mounting 4 six or eight inch diameter lights
• Easy installation, bolts up to existing factory holes, no drilling required
• Lights sold separately
• FOR OFF-ROAD USE ONLY!
 

2010 F-150 SVT RAPTOR ENHANCED FRONT SKID PLATE
M-5018-F15R

• Fits F-150 SVT Raptor
• Replaces production front skid plate
• Added side and centre reinforcements
• Complete with mounting brackets and hardware
• Powdercoated "foundry finish" gray
• "Ford Racing" logo, right and left sides
 

INBOARD TIREGATE WHEEL AND TIRE CARRIER
M-1B120-F15

• Fits 2010 F-150 SVT Raptor and 2004-2010 standard bed F-150 trucks
• Allows you to carry a spare tire while maintaining ground clearance
• Easy to open with two quick-release pins
• Designed for inboard mounting of up to a 40" spare tire
• No cutting, welding or drilling require
• Mandrel-bent, MIG-welded tubular construction
• Powdercoated with black polyester semi-gloss and is equipped with zinc-plated hardware for long lasting performance in extreme conditions.
NOTE: Backup camera will not function with installation or tiregate

LIGHTNING INTERCOOLER
80245N 99-04 Lightning $504.95

Replace your factory intercooler with this all-aluminum large tube high efficiency intercooler for extended cooling performance for drag race or street.

SUPERCHARGER PULLEY UPGRADE
SH01 Ford Lightning, Harley Davidson  $137.95

This smaller blower pulley allows generation of greater torque at lower speeds by increasing the boost available at low RPM.

555-3110 $149.00 $163.95

This high flow intake kit eliminates the factory air box assembly and replaces it with a much higher flowing dual-cone open air filter. The kit includes an aluminum intake tube that goes from the factory mass air to the open air filter located close to the fender. All hardware and brackets are included. The aluminum intake tube is powdercoated with a silver metal flake finish. The filter is reusable too. Just clean and oil it and it's like new again.

LIGHTNING THROTTLE BODY
LTB 99-04 Lightning  $504.95
LTBCAST Cast Throttle Body $407
Oversize single blade oval throttle body for Lightning. Increased airflow capability for more power potential and better throttle response. Fully CNC-machined with polished aluminum finish.

82428 .......................................$434.95/SET OF 8
The new Blaster CoPs are designed as a direct bolt-in replacement coil for 4.6L 2V Modular Motor. The housing and installation are the same as the factory. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. There is also patented dual magnet technology to step up the output. Together, this combines a coil that produces higher voltage and spark energy! The Coil-on-Plug design of the Blaster CoPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine.

1B1.8018A2 00-03 Lightning/F150 2WD Front Kit ........$4064.95
RTR-8582 00-03 Lightning/F150 2WD Rear Rotors........$395.95

Stop that truck! Why should cars get all the fun, now there‚s huge brake available for the trucks too. Front Brembo brake kit includes big cross-drilled rotors, oversize 4-piston calipers finished in red, stainless-steel braided flex lines, brackets, and hardware. Matching rear rotors available separately.