2011-2013 5.0 Coyote engine

Free Shipping Continental US and Canada

 

5.0L 4V Ti-VCT 412HP MUSTANG CRATE ENGINE

M-6007-M50

Ford Racing 412hp/390tq crate engine, runs on 87 to 91 octane pump fuel. Ideal for street rods, kit cars, or simply updating an older Mustang. Light weight ( 444 lbs ), 4 valve per cylinder, double overhead camshaft, Twin Independent Variable Camshaft Timing gives exceptional fuel economy and great power, revs to 6500 rpm. Includes nodular iron flywheel, shorty stainless headers.

CALL  (519)421-2291 TO ORDER! OUR PRICES ARE TOO LOW TO ADVERTISE!

5.0L DOHC ALUMINATOR CRATE ENGINE NATURALLY ASPIRATED

M-6007-A50NA*

Ford Racing has taken the Mustang GT 5.0L 4V TiVCT engine and created another in its series of “Aluminator” crate engines built to deliver higher performance.  The 5.0 Aluminator NA is built with extreme duty connecting rods and pistons designed specifically for high performance applications. Mahle  11.0:1 compression ratio forged pistons are hard anodized with Graphal low friction coating. The connecting rods are premium Manley H-beam with ARP 2000 bolts and fitted with BOSS 302 high performance bearings.

5.0L DOHC ALUMINATOR CRATE ENGINE FOR SUPERCHARGED APPLICATIONS

M-6007-A50SC*

Ford Racing’s 5.0L Mustang “Aluminator” crate engine is a modern 5.0L 32-valve DOHC V-8 that uses advanced features like Twin Independent Variable Camshaft Timing (Ti-VCT) to deliver big power. Unlike the factory 5.0L engine, the “Aluminator” is built with low compression forged pistons and H-beam connecting rods to meet the demands of forced induction.

CALL  (519)421-2291 TO ORDER! OUR PRICES ARE TOO LOW TO ADVERTISE!

5.0L 4V TI-VCT MUSTANG BOSS 302 CRATE ENGINE

M-6007-M50B*

Ford Racing’s aluminum 5.0L Mustang Boss 302 crate engine takes the Ti-VCT 5.0L engine to the next level of performance with high flow CNC cylinder heads and revised intake to deliver 444 horsepower and 380 ft.-lb.+ of torque (with premium fuel). The lightweight aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength. For the track, the oil pan features a large sump 8 qt capacity with revised oil pan baffling for improved oil control under hard cornering.

CALL  (519)421-2291 TO ORDER! OUR PRICES ARE TOO LOW TO ADVERTISE!

 

 

Sean Hyland Value Packages

We have put together the most asked for parts into one easy to order package that offers the best value. Get an engine package with all the required support components at one price.

VALUE PACKAGE 1

  • M-6007-M50 Coyote Crate Engine
  • M-6017-A5V4V Engine Controls Kit
  • M-9680=M50 Engine Cover Kit
  • M-8600-M50BALT Alternator Kit
  • SHM 100 Billet Fuel Rail Kit
  • SHM 139 Billet Fuel Regulator
  • SHM 105 In-Line Fuel Pump Fittings, Mounting Hardware
  • SHM211 A/C Compressor, belt, mounting bolts
  • SHM 212 Billet A/C fitting Kit, -8AN, -10AN fittings
  • SHM 48 Starter, Starter bolts
  • SHM 712 Power Stealing Kit

SHM-CCVP1| $9995| CALL (519) 421-2291 TO ORDER

VALUE PACKAGE 1

  • M-6007-M50 Coyote Crate Engine
  • M-6017-A5V4V Engine Controls Kit
  • M-9680=M50 Engine Cover Kit
  • M-8600-M50BALT Alternator Kit
  • SHM 100 Billet Fuel Rail Kit
  • SHM 139 Billet Fuel Regulator
  • SHM 105 In-Line Fuel Pump Fittings, Mounting Hardware
  • SHM211 A/C Compressor, belt, mounting bolts
  • SHM 212 Billet A/C fitting Kit, -8AN, -10AN fittings
  • SHM 48 Starter, Starter bolts
  • SHM 712 Power Stealing Kit

SHM-CCVP2| $10995| CALL (519) 421-2291 TO ORDER

VALUE PACKAGE 3

  • M-6007-A50SC Coyote Crate Engine
  • M-6017-A5V4V Engine Controls Kit
  • M-9680=M50 Engine Cover Kit
  • M-8600-M50BALT Alternator Kit
  • SHM 100 Billet Fuel Rail Kit
  • SHM 139 Billet Fuel Regulator
  • SHM 105 In-Line Fuel Pump Fittings, Mounting Hardware
  • SHM211 A/C Compressor, belt, mounting bolts
  • SHM 212 Billet A/C fitting Kit, -8AN, -10AN fittings
  • SHM 48 Starter, Starter bolts
  • SHM 712 Power Stealing Kit

SHM-CCVP3| $10995| CALL (519) 421-2291 TO ORDER

 

 

ADDTIONAL PARTS

Engine cover kit – $ 119

M-9680-M50

Production 2011 Mustang GT engine cover kit finishes the top of the engine for a clean look.

 

Billet oil filter adapter for Coyote engine.

$119

Relocate your oil filter away from the block

in your custom installation. Kit comes with billet adapter block and stainless steel bolts. -10AN port size

 

Starter – $299

5.0 crate engine starter

Air Compressor – $459

Air conditioning compressor, serpentine belt and mounting bolt kit for adding air conditioning to your 5.0 crate engine

Call for package pricing on your projects needs

Engine mounts

Aluminum brackets, billet aluminum/urethane engine mounts, mounting bolt kit provides engine mounts to install the 5.0 crate engine into any 2005-2020 Mustang GT, or into a street rod/kit car project

Engine controls kit – $1599

M-6017-A504V

Designed to run the 5.0 crate engine with a manual transmission. Provides calibrated PCM, electronic throttle pedal, production airbox/mass air assembly, inlet tube, EGO sensors. Pre-wired power distribution box takes the complexity out of installation. Requires return type fuel system.

Billet fuel rails- $195

Designed for the 5.0 crate engine, these billet aluminum fuel rails permit a return type fuel system to be installed on the engine. CNC machined from billet 6061-T6 aluminum. Threaded for 8AN O ring fittings.

EFI Fuel Pump – $249

In line EFI fuel pump, 255 litres per hour, designed to work in a return
type fuel system as used by the Ford Racing engine controls kit. Comes with
installation hardware and 3/8″ barb fittings standard. Simply install
between the fuel tank and the engine, and rote lines as required. The engine
controls kit will supply the power for the fuel pump through the power
distribution box.

MUSTANG BOSS 302 ALTERNATOR KIT

M-8600-M50BALT| $279

This kit includes special high performance components as used on the production 2012 Mustang BOSS 302 and is designed to operate at higher RPMs.

This kit fits Mustang GT 5.0L Ti-VCT engine and features:

  • High performance BOSS Alternator with 1-way clutch to prevent belt hop-off during upshifts
  • Higher tension belt tensioner
  • Larger pulley to slow the armature speed, reduce drag and reduce parasitic hp loss
  • Also fits M-6007-M50 5.0L 4V TiVCT, M-6007-A50NA – A50SC – M50B – and M50BR crate engines
  • Kit includes OEM Mustang BOSS 302 alternator, tensioner, idler pulley belt and mounting hardware

Optional -6AN fittings $29/pair

Optional -8AN fittings $29/pair

Fuel Regulator $195

Billet fuel regulator, 8AN O ring style ports, adjustable pressure, vacuum reference port to attach to intake manifold. Installs on return line to tank, allowing the fuel pressure to be set for the 5.0 crate engine package

Transmission Packages

We have 5 speed and 6 speed manual transmission packages, and 4 speed electronic overdrive transmission packages available for the 5.0 crate engine.

Call (519)421-2291 to order today!

5 speed TKO600 transmission package

Tremec TKO 600 5 speed transmission, rated at 600ft/lbs torque capacity, 11 inch HD organic clutch, clutch cover, clutch bolt kit, aluminum bellhousing, bolt kit, block seperator plate, and driveshaft yoke

SHM-TPK-5|$3170

6 speed Tremec Magnum Transmission package

Tremec Magnum 6 speed transmission, rated at ft/lbs torque capacity, 11 inch HD organic clutch, clutch cover, clutch cover bolt kit, aluminum bellhousing, bolt kit, block seperator plate, and driveshaft yoke

SHM-TPK-6| $3995

4R70W 4 speed automatic transmission package

Rebuilt 4R70W transmission, torque converter, flexplate, transmission cooler,  attaching bolts and stand alone computer with wiring harness. Programmable transmission computer allows fine tuning the shifting for any application. Comes with  block seperator plate and driveshaft yoke.

SHM-TPK-4R70W| $3995


Power steering kit for Coyote 5.0 crate engine with Air Conditioning

SHM-PSK1 |$595 complete

Here is the solution to installing the 2013 Ford Mustang 5.0 engine into a street rod or resto-mod, that requires a hydraulic power steering pump. The kit includes an OEM quality pump, with a -10AN inlet, and a -6AN outlet, mounting brackets, serpentine belt and all hardware. Easy installation.

Power steering kit for Coyote 5.0 crate engine/NO Air Conditioning



SHM-PSK2 |$595

An alternate solution to installing the 2013 Ford Mustang 5.0 engine into a street rod or resto-mod, that requires a hydraulic power steering pump. The kit includes an OEM quality pump, mounting brackets, serpentine belt and all hardware. Easy installation.

Kit Includes

  • OEM Pump with Pulley,
  •  Belt
  • Bracket,
  • All Attaching hardware

 

 

5.0LTI-VCT CAST IRON EXHAUST MANIFOLD

M-9430-SR50*|$149.00

  • Fits: 2011-2013 5.0L Ti-VCT engine
  • Cast iron exhaust manifold “hugs” block better than Mustang Ti-VCT tubular exhaust header
  • Great for street rod builds or other Ford projects where cast iron manifold is required