|
Package
Contents
• Twin
Water Cooled Dual Ball Bearing 61mm Turbos
• Two Tial 44mm Wastegates
• Two Billet Aluminum Compressor Bypass Valves
• CNC Machined Billet Aluminum Upper Intake Manifold
• Custom Stainless Steel Turbo Headers
• Stainless Steel Turbo Downpipes
• High Flow Turbo Air Inlet Plumbing
• High Flow Turbo Air Discharge Plumbing
• Stainless Steel Turbo Oil Feed Lines
• Stainless Steel Turbo Oil Drain Lines
• All Necessary Fittings, Gaskets, and Fluids
• Before and After Dyno Testing
• $35,000 Installed
|
 |
|
|
 |
 |
FORD GT ENGINES
We offer complete Ford GT engine packages for use with
superchargers, turbochargers or nitrous at power levels up
to 1600hp. Each engine receives custom forged pistons,
300M connecting rods, race prepped crankshafts, HD engine bearings, stainless valves, oversize valve seats, ARP
studs, race engine preparation and assembly. Please contact us for complete details. |
 |
  |
MOTON COIL-OVER SUSPENSION
MOTON
Here is a worthy suspension upgrade for the GT.
Moton dampers, choice of many Grand Am teams has produced a coil-over kit which allows the ride height to
be adjusted, and features 16 position damping adjustment, perfect for track days. We provide the
complete kit, with billet aluminum remote
reservoir mounts, and uprated Hypercoil springs calibrated for street or track. The ultimate suspension
for your Ford GT.
Call for pricing |
 |
 |
I-FORGED WHEELS
I-Forged 2 piece forged aluminum wheels are specifically designed for the Ford GT, and allow installation of 335/25/22 rear and 255/30/20 front tires on the GT, while providing adequate clearance for upgraded brake packages. Call for details. |
 |
 |
FORD GT FRONT WHEEL
M-1007-GTF
• Optional forged front wheel available on 2005-06 Ford GT.
• Open lug design
• 5-lug, 4.5 “ bolt circle
• 6.90” backspacing
• 18” x 9” wide
• Includes Ford GT center cap
$940.00 |
 |
 |
FORD GT REAR WHEEL
M-1007-GTR
• Optional forged front wheel available on 2005-06 Ford GT.
• Open lug design
• 5-lug, 4.5 “ bolt circle
• 7.295” backspacing
• 19” x 11.5” wide
• Includes Ford GT center cap
$999.00 |
 |
 |
FORD GT REAR EXIT HEADERS
M-9430-GTX
• Replaces factory exhaust manifolds, cat pipe and mufflers.
• Includes collector type race mufflers
• Includes installation hardware.
• Exits in stock location.
$4395.00
|
 |
 |
ACCUFAB
X-PIPE
GTXPIPE
Looking to add a little rumble to your exhaust while
gaining additional power? The answer
is to install an Accufab X-Pipe which eliminates the
big, bulky muffler and adds a
robust sound without giving you a headache! The X-Pipe
is individually fabricated from
304 stainless, custom welded & polished. It weighs
in at a mere 12.5 pounds & includes
brackets, bolts and gaskets. It will reduce under hood
temperatures by 20 degrees,
removes 40 pounds from the weight and adds 10-12 hp!
$1573.95
|
 |
 |
FORD GT PERFORMANCE MUFFLER KIT
M-5230-GT
• Substantially louder than stock muffler
• Exits in stock location.
• Mounts at all stock points
• Includes Installation hardware.
$2695.00 |
 |
 |
FORD GT
BREMBO MONOBLOC BIG BRAKE KIT
1M1-9012A
Brembo, the world leader in braking technology, introduces a new
generation of 6 piston, aluminum, monobloc calipers,
combined with lightweight 2 piece cross drilled rotors, perfect for track days.
Features:
• 6 Piston
• Monobloc aluminum 1-piece body
• Integral bridge for maximum stiffness
• Differential piston bores for even pad wear
• Large pad volume for performance and long wear
• Colors: Black, Red and Silver
$4394.95 |
 |
|

|
FORD GT TWO-PIECE FRONT ROTOR SET
M-1125-GT
• Two-piece 355mm diameter front rotors for track use.
• Cross drilled for improved cooling.
• Aluminum hat reduces rotating and unsprung mass.
• Sold in sets of two.
• Fits with stock Ford GT calipers and brake pads.
$1659.95 |
 |
|

|
FORD GT TWO-PIECE REAR ROTOR SET
M-2026-GT
• Two-piece 330mm diameter rear rotors for track use.
• Cross drilled for improved cooling.
• Aluminum hat reduces rotating and unsprung mass.
• Sold in sets of two.
• Fits with stock Ford GT calipers and brake pads.
$1659.95 |
 |
 |
FORD GT TRANSAXLE COOLER KIT
M-7095-GT
• Kit includes cooler and all installation hardware,
fittings, lines and brackets for Ford GT.
• A must for aggressive driving and open track events.
• Extends the life of the shock transaxle.
$1279.95 |
 |
 |
REAR AXLE BOLT KIT
GTRAB
The OEM rear axle bolts (half-shaft) have shown a propensity for breakage under anything other than normal street use. The incredible torque and large tire contact area of the
GT, absolutely requires the finest driveline components. In this regard, here is special, high performance rear axle bolts manufactured to stringent specifications. They are easy to install and inexpensive insurance against what could result in a catastrophic failure.
$219.95 |
 |
 |
CTEK MULTI US 3300
56-158
Extend the life of your battery with a CTEK battery charger when you are not driving your Ford GT. The microprocessor controller keeps the battery charged at optimum condition, ready to be used anytime, ideal for cars which are not driven for weeks at a time. The quick connect harness allows the charger to be easily connected anytime the car is not being driven. Perfect for motorcycles too!
$76.95 |
 |
 |
FORD GT BILLET OIL FILL CAP
M-6766-GT
• Ford GT oil fill cap with billet cover.
• Direct replacement for Ford GT oil fill cap.
• GT logo machined into cap surface.
• Chrome plated.
$60.00 |
 |
 |
FORD GT COOLANT OVERFLOW CAP
M-8006-GT
• Ford GT coolant overflow cap with billet cover.
• “GT” logo machined in cap surface.
• Fits both coolant overflow and intercooler reservoir.
$71.95 |
 |
 |
FORD GT SHORT THROW SHIFTER
M-7210-GT
• Reduces throw and cross gate by approximately 25% compared to stock.
• Anodized billet aluminum and stainless steel construction.
• Bolts in stock location.
• Includes hardware.
• Maintains production ergonomics by not relocating shift knob.
$449.95 |
 |
 |
NGK SPARK PLUG
4177
After extensive testing with the Ford GT, we’ve found that this specific heat range of NKG Spark Plug to be the most effective.
$4.95 Ea |
 |
 |
FUEL FILTER
FG-1091
Stock replacement fuel filter for the Ford GT. The fuel filter should be drained once a year, regardless of accumulated mileage.
$186.95
|
 |
 |
OIL FILTER
FL-2024
Stock replacement oil filter for the Ford GT. The dealers often do not stock these oil filters, best to buy one and keep it on hand.
$35.95
|
 |
 |
MAGNETIC OIL DRAIN PLUGS
MDP-3
The addition of these powerful magnetic oil drain plugs will help insure that any loose pieces of metal do not find their way into your engine and cause undue damage. The set contains 3 plugs which easily replace OEM parts.
$109.95 |
 |
 |
FORD GT IGNITION COIL COVERS
M-6067-A
• Polished billet aluminum.
• Ford Racing logo.
$315.95 |
 |