SHELBY GT500 SHORTY HEADERS
M-9430-C54 STAINLESS STEEL $649
• 409 stainless steel tubes
• Machined flange
• Bolts to stock exhaust pipes
• Includes gaskets, bolts and studs
M-9430-C54C CERAMIC COATED STAINLESS STEEL $799
• Identical to stainless steel header, but with Jet-Hot® ceramic finish
• Stain and rust resistant
5.4L COBRA JET ENGINE LONG TUBE RACE HEADERS M-9430-CJ $1500.00
• Fits 5.4L 4V Cobra Jet Engine,
Romeo 605 Engine and stock SVT Mustang Engine
• Original equipment on the 2008
and 2010 Cobra Jet Mustangs
• 1 7/8 OD Primary Tubes and 3/8
thick 1pc laser cut flanges
• Merge collectors with scavenger spikes
• HEGO bungs included
• Headers made from 304 Stainless
Steel Material
• Welded on Cobra Jet Logo for Authenticity
• Compatible with OEM gaskets.
• Dyno developed design for
exceptional racing performance
SHELBY GT500 JBA LONG TUBE HEADERS
6696S
• Increased HP and TQ throughout the RPM range.
• Large diameter mandrel-bent stainless steel primary range.
• Extra thick 3/8” laser-cut flanges.
• Patented JBA Firecone merged collector.
• Complete hardware and instructions.
$891.95
KOOK’S GT500 STAINLESS LONG TUBE HEADERS
6027
Kook’s GT500 Stainless Long Tube Headers contain 1 3/4” primaries with 3” collector. Excellent sound, performance, and power again. The Kook’s Headers do not sit low like others, allowing you to lower your GT500 without clearance issues. Excellent fitment. Make sure to
purchase the matching 3” x pipe with cats.
$1044.95
SHELBY GT500 JBA X-PIPE
6695SX - OFF ROAD 2.5" (NO CATS) $274.95
6695SXC - 2.5" WITH HIGH FLOW CATS $737.95
6696sx - 3" OFF ROAD (NO CATS) $274.95
6696sxc - 3" WITH HIGH FLOW CATS $736.95 STOCK EXHAUST MANIFOLDS:
1795SX - 2.5" OFF ROAD STOCK MANIFOLDS (NO CATS)
$274.95
1796SX - 3" OFF ROAD STOCK MANIFOLDS (NO CATS)
$274.95
1796SXc - 3" WITH HIGH FLOW CATS STOCK MANIFOLDS
(NO CATS) $736.95
Designed to work in conjunction with the JBA Long Tube
Headers. Stainless steel 2 1/2 in piping. Available
with high flow catalytic converters.
• Increased horsepower and torque throughout RPM
• Improved throttle response
• Improved fuel economy
KOOK’S GT500 STAINLESS 3” X PIPE
6028-CX
Kook’s GT500 Stainless 3” X Pipe with flow catalytic converters.
This is designed to match up to the new Kook’s Stainless Headers with 3” collector. X pipe sizes down to meet with factory exhaust, or other 2 1/2” aftermarket
axel back systems.
$856.95
SHELBY
GT500 MUFFLER KIT 50 STATE
M-5230-SVT1
• Fits 2007-09 Shelby GT500
• T-304 stainless construction
• Deeper, "throatier" exhaust note
• Ford Racing embossed 3.5" polished exhaust
tips
$779
SHELBY GT500 MUFFLER KIT 49 STATE
M-5230-SGT
• Fits 2007-09 Shelby GT500
• T304 stainless construction
• Louder, throatier exhaust.
• Includes mufflers with Ford Racing embossed 3.5" tips
$779
05-09 MUSTANG GT/07-09 MUSTANG SVT
FR500S MUFFLER KIT (50 STATE)
M-5230-S
• Fits 05-09 Mustang GT and 07-09
Mustang SVT.
• Homologated for use on the
Mustang FR500S
• Body of mufflers embossed with
Ford Racing logo
• Aluminized 409 stainless steel
corrosion-resistant body with polished 304 stainless
3.5" diameter tips
• Throatier exhaust note
• 50 state drive-by noise legal
$599
2010
MUSTANG GT/SVT FR500S MUFFLER KIT (50 STATE)
M-5230-SA
• Fits 2010 Mustang GT and 2010 SVT
Mustang
• Same as M-5230-S except with
black powder-coated body and extended tips to fit 2010
Mustang
• Aluminized 409 stainless steel
corrosion-resistant body with polished 304 stainless
3.5" diameter tips
• Body of mufflers embossed with
Ford Racing Logo
• Throatier exhaust note
• 50 state drive-by noise legal
