LINE CARD

This is only a partial list of the manufacturers we distribute for. Click here for more. 

 
Proudly Canadian

Sean Hyland Motorsport is located in Woodstock, Ontario, Canada. 

Terms and Conditions

4.6 cast iron block, filled with a forged steel crankshaft, forged rods and 9.6-1 compression forged pistons. Ported Pi cylinder heads are fitted with oversize stainless valves and high performance beehive valve springs. A pair of billet camshafts, ground with our hot street cam grind provide a broad powerband and the lopey idle of a hot rod engine, Billet fuel rails, polished billet throttle body and cast aluminum valve covers complete this engine package.
$11,545

500 HP 4.6 SOHC
SHM2V500

This is the bad boy of the SOHC crate engines. Beginning with a cast iron block, we add a forged steel crankshaft, forged connecting rods, and boost friendly 9.0-1 forged pistons. Ported PI cylinder heads fitted with stainless valves and high performance valve springs are actuated with SHM billet camshafts. A twin screw supercharger feeds 12 lbs. of boost into the engine, and the cast aluminum valve covers, and polished throttle body compete the visual appeal of this engine package.

$15,745

$17,845
 

450 HP 4.6 DOHC
SHM4V450

Sean Hyland pioneered the 5 litre version of the modular 4 valve engine in 1998 for road racing, and this engine is the latest iteration of that concept. Utilizing an aluminum block, thin wall cast iron sleeves are installed, increasing the bore to 3.70 inches (94mm). Forged pistons of 10.5-1 compression and forged steel connecting rods are added to the forged steel crankshaft. FR500 cylinder heads are ported, fitted with oversize stainless valves and high lift billet steel camshafts. A magnesium FR500 intake manifold with variable length intake runners sits on top of this engine, completing the stunning visual presentation.

$14,695

600 HP 4.6 DOHC
SHM4V600

The 4.6 cast iron block with a forged steel crankshaft, is fitted with steel rods and boost friendly 8.6-1 forged pistons. 4 valve cylinder heads, topped off with a twin screw supercharger pushing out 15 psi of boost, complete this package, creating a ground pounding 600 streetable horsepower on pump fuel. Billet fuel rails and billet pulley drives complete the under hood appeal of this engine package.

$18,370

600 HP 6.0L DOHC CRATE ENGINE

The Sean Hyland 600 HP Crate Engine utilizes out 6 liter aluminum block, billet steel main caps, forged steel crankshaft, forged H beam rods, forged pistons. The Ford GT 4 valve cylinder heads use SHM camshafts to operate the valves. A 4bbl Demon carb sits on an aluminum intake, and the ignition is provided with a crank trigger system. The engine comes complete with air filter, water pump, and one wire alternator. Perfect for street rods and project cars. 

$15,745

SHELBY GT500 CRATE ENGINES
800HP ON PUMP GAS - TURN KEY!
SHM developed the first Shelby GT500 Turn-Key engine crate package, designed for easy installation, no programming skills required. Superior modern DOHC powertrain solution for Resto-mods and street rod applications.

·   3 wire hookup
·   Dyno Tested
·   Includes fuel system electronics, engine mounts, intercooler, alternator, power steering, a/c
·   Full emissions

• 500hp supercharged 5.4L DOHC engine
• Original equipment in the 2007 Mustang GT500
• 500 HP @ 6000 RPM, 480 ft./lbs of torque @ 4500 RPM
• Fully dressed including accessories and supercharger
• Does not include vehicle wiring and PCM
• Calibration code 7ZF2SC0508
• The most powerful Mustang production engine ever!
• Perfect for your high-end project!
• 12 month, 12,000 mile warranty

$17,699

• Approved for use in Grand American Road Racing, GS Class, for the 2005 Mustang
• This is the same engine as used in the FRPP Mustang FR500C Grand-Am Cup race car
• Unique FRPP 5.0L modular block
• Utilizes  the same cylinder head as used on the 2005 Ford GT
• 11.0:1 compression ratio
• Performance Intake Manifold M-9424-R50
• Twin 57 mm throttle body
• Unique camshafts designed specifically for this engine
• High-capacity "road-race" oil pan with integrated baffling and windage tray
• Additional wiring harness(es) required depending on application

$24,995