- Fits 8.8″ axle
- Low profile design also fits 2005-2011 Mustang GT and 2007-2011 SVT Mustang
- Light-weight 356T6 aluminum casting replaces rear cover on 8.8″
- Load bolts provide additional support for differential bearing caps
- Increase ring and pinion gear life NOTE: Check exterior clearance to chassis/suspension.
- Will not fit IRS
- Fits 2005-2011 Mustang GT
- 8.8″ 3.55 gear ratio axle assembly
- 31-spline axles and Traction-Lok differential
- Includes axle shafts
- Factory 8.8 axle housing kit for 2005-2010 Mustang
- Perfect for building a custom axle!
- Allows you to customize your gearset and differential
- Inlcudes: -Axle housing -Housing vent -Left and Right 31 spline production axle shafts -2005-2009 Mustang pinion flange -2003-2004 Cobra 1350 pinion flange -Cover bolts -Pinion washer -C-locks -M-4210-B ring and pinion installation kit -M-1126-C shim kit
- Designed by Ford Racing and Hurst
- Fits 2010 Mustang GT. For 2005-2009 Mustang GT see M-7210-MGT
- Teflon bearing with unique shifter rod and OE main stamping
- Chrome stick with “Ford Racing” White Shift Knob
- Includes jam nut & shifter boot
- Urethane body vibration isolators
- Reduced throw
- For replacment “Ford Racing” Black Shift Knob see M-7213-P
- Shifter rebuild kit see M-7211-A
2005-10 6 SPEED TRANSMISSION CONVERSION
BA24 $3995.00 buy
Kit includes 6-Speed Transmission rated @ 700 HP, Triple, Double Synchronizers, 26T Input Shaft, Hydraulic Throw Out Bearing, Short Throw Shifter with Lever and Knob, Inner and Outer Shifter Boots, Crossmember, 1-Piece 3 1/2” Aluminum Driveshaft. This Kit requires a 26T Clutch Disc. Kit is a true bolt-in kit, no fabrication is required.
TRI-AX SHIFTER GT
555-7305 $322.95 buy
The newest Tri-Ax Shifter is designed expressly for the S197 Ford Mustang GT, with a style that is reminiscent of the venerable “Top Loader”. Precise action, stop-bolts to prevent damage to the transmission and linkage under hard usage, our two-position handle height, and internal spring tension to assist you in never missing 3rd gear!
TRI-AX REMOTE RACING SHIFTER
555-7321 $660.95 buy
The Tri-Ax Shifter is designed expressly for the S197 Ford Mustang GT running a Tremec 500/600 Transmission. It keeps the shifter in the stock location and is fully adjust in length and height.
2010 MUSTANG GT SHORT THROW SHIFTER
M-7210-MGTA 2010 $299.00 buy
• Designed by Ford Racing and Hurst
• Teflon bearing with unique shifter rod and OE main stamping
• Chrome stick “Ford Racing” white shift knob
• Includes jam nut and shifter boot
• Urethane body vibration isolators
• Reduced throw
2005-2009 MUSTANG GT SHORT THROW SHIFTER
M-7210-MGT 2005-2009 $299.00 buy
• Designed by Ford Racing and Hurst
• Teflon bearing with unique shifter rod and OE main stamping
• Chrome stick “Ford Racing” white shift knob
• Includes jam nut
• Urethane body vibration isolators
• Reduced throw
2005-2010 MUSTANG FORD RACING SHIFTER SERVICE KIT
MODULAR BELLHOUSING INSTALLATION KIT
M-7771-A $29.00 buy
• Kit includes:
• 1 clutch ball stud
• 7 bellhousing-to-block bolts
• 2 starter-index-plate-to-bellhousing bolts
EXEDY TWIN PLATE RACING CLUTCH
ET01SD 8-bolt flywheel $2304.95 buy
Twin-disc clutch kit for high horsepower 4.6 3V Mustangs. 1000 lb-ft torque capacity. Includes lightweight chrome moly steel flywheel, forged aluminum cover, ventilated plates, and spring dampened discs to protect the driveline.
| 2007 SVT MUSTANG COBRA CLUTCH AND FLYWHEEL ASSEMBLY |
M-7060-A54 $999.00 buy
Kit contains 26 spline dual disc clutch, pressure plate, pressure plate attaching bolts and flywheel. Original equipment on 2007-08 Shelby GT500.
RAM CLUTCHES PERFORMANCE CLUTCH
98952HD – 10 SPLINE $498.95 buy
98952HDT – 26 SPLINE $498.95 buy
Ram performance clutches are an affordable performance clutch for moderately modified mustangs. Clutch is a direct replacement for the 3V, utilizing the stock hydraulic TO bearing (not included). Available as stock 10 spline, or 26 spline for performance transmissions.
| PILOT BEARING 7600-1 11.95 buy Stock replacement pilot bearing for the 3V mustang. |
4.6L MANUAL FLYWHEEL BOLTS
M-6379-B $11.95 buy
Fits 4.6L modular engines with manual transmission flywheels. M10x1x26.5 bolt.
Package of 8.
ARP FLYWHEEL BOLTS
254-2801 $40.95 buy
Top quality high performance flywheel bolts, 200,000 psi tensile strength. Package of 8.
11″ CLUTCH BOLT KIT
M-6397-A46 $14.95 buy
Includes pressure plate bolts and dowel pins for use with 11″ modular flywheel.
RING GEAR & PINION SETS
Improve the accelleration of your Mustang and improve yor quarter mile times with these ring and pinion kits
PART NO. RATIO AXLE
M-4209-F373N 3.73:1 8.8 $179.95 buy
M-4209-G410A 4.10:1 8.8 $179.95 buy
8.8 RING & PINION INSTALLATION KIT
M-4210-B $89.95 buy
Kit includes pinion and carrier bearings, ring gear bolts, pinion seal, crush collar, pinion nut, pinion and carrier shims.
| 8.8” TRACTION-LOK LIMITED SLIP DIFFERENTIAL M-4204-F318C $299.00 buy • 8.8″ differential • Fits 31 spline axles • Carbon fiber clutch plates for increased durability • Original equipment in 2003-04 Mustang Cobra
|
| 8.8” T-2 TORSEN DIFFERENTIAL M-4204-T31 $589.00 buy • 8.8″ differential • Torsen T-2 type differential • Features full time torque-sensing, torque-biasing.
8.8” TRACTION-LOK REBUILD KIT WITH CARBON DISCS M-4700-C $128.95 buy
2005 – 08 MUSTANG DRIVE SHAFT LOOPS KIT
COBRA JET DRIVESHAFT LOOP M-5478-CJ $139.00 buy
|
