2005-2010 MUSTANG V6 BRAKE UPGRADE KIT

M-2300-D* $139
  • Fits 2005-2010 Mustang V6
  • Upgrades Mustang V6 11.5″ front rotors to the larger Mustang GT 12.4″ rotors for increased stopping power
  • Uses existing calipers and brake pads
  • Easily installed, no bleeding required
  • Requires 17″ or larger 2005-2009 Mustang wheels such as M-1007-T178C for caliper clearance
  • Allows use of M-1007-S1885, M-1007-S1885B and M-1007-S1885C 18″ style wheels on Mustang V6

2005-2010 FORD MUSTANG V6 4.0L
SUPERCHARGING SYSTEMS

4FU218-610SQ – 05-06 MUSTANG V6 4.0L V-2 SQ S-TRIM STANDARD SYSTEM $3434.00
18-618SQ – 05-06 MUSTANG V6 4.0L V-2 SQ S-TRIM STANDARD SYSTEM – POLISHED $3640.00
4FU218-620SQ – 05 – 06 MUSTANG V6 4.0L V-2 SQ S-TRIM HIGH-OUTPUT SYSTEM $4464.00
4FU218-628SQ – 05 – 06 MUSTANG V6 4.0L V-2 SQ S-TRIM HIGH-OUTPUT SYSTEM – POLISHED. $4738.00
4FU218-630SQ – 07 MUSTANG V6 4.0L V-2 SQ S-TRIM STANDARD SYSTEM $3434.00
4FU218-638SQ – 07 MUSTANG V6 4.0L V-2 SQ S-TRIM STANDARD SYSTEM, POLISHED $3640.00
4FU218-640SQ – 07 MUSTANG V6 4.0L V-2 SQ S-TRIM HIGH-OUTPUT SYSTEM $4464.00
4FU218-648SQ – 07 MUSTANG V6 4.0L V-2 SQ S-TRIM HIGH-OUTPUT SYSTEM – POLISHED. $4738.00
The 2005-2007 Mustang V6 comes from the factory with an impressive 210 horsepower and 254 lb./ft. of torque. This Vortech supercharging system can safely increase this to 290 horsepower and 294 lb./ft. of torque.
High Output Supercharging Systems:
The increased boost level, high output supercharger system, features a fully integrated air to water aftercooler approach to charge cooling. This system will increase horsepower from 210 to 330 and will increase torque from 240 lb./ft. to 337 lb./ft.
Quality Features:
• Vortech gear driven supercharger with SQ technology provides nearly silent operation and unmatched reliability.
• Fuel management upgrade includes high-capacity replacement fuel injectors and a DiabloSport Predator hand-held programmer to re-flash the factory processor.
• Integrated air/water, dual-pass charge cooler configuration allows for additional horsepower gains and features maintenance-free design (High output systems).

2010 MUSTANG V6 POWER UPGRADE PACKAGE

M-FR1-MV6 – $1175

  • Fits 2010 Mustang V6 with Automatic or Manual Transmission. For 2005-2009 Mustang V6 see M-2007-FR1V6
  • Approximate increase of 15 peak hp / up to 17 lb-ft over stock

Kit includes:

  • Ford Racing ProCal tool with performance calibration for significantly improved throttle response and performance feel
  • 2010 Mustang V6 High Flow K&N Filter With Performance Calibration M-9603-MV6
  • True Dual Exhaust with X-Pipe and FR500S Performance Mufflers M-5230-MV62
  • Performance Oil Filter CM-6731-FL820
  • Premium (91 octane or higher) fuel only
  • Due to multiple powertrain calibrations, online registration is required to receive ProCal calibration delivery tool after purchase
  • Ford Racing does not ship ProCal tools directly overseas. Customers must make special arrangements with their Ford Racing Distributor
  • Powertrain calibrations are developed and supported for U.S. and Canadian vehicles only
  • Unlike our competitors, all Ford Racing Power Upgrade Packages are 50 state emissions legal and eligible for limited warranty when installed by a Ford or Lincoln-Mercury Dealer

2005-2009 MUSTANG V6 COLD AIR KIT WITH PERFORMANCE CALIBRATION

M-9603-V605 – $449.00
  • Fits 2005-2009 V6 Mustang with Manual or Automatic transmission. For 2010 Mustang V6 see M-9603-MV6
  • Approximate increase of 12 peak hp / up to 13 lb-ft over stock
  • Kit includes:
    • Ford Racing ProCal tool with performance calibration for significantly improved throttle response and performance feel
    • Disposable air filter element M-9601-B
  • Utilizes production quality components which mount in the stock location. The high flow molded plastic bucket features a painted Ford Racing logo with unique clean-air tube which provides an enhanced intake sound.
  • Premium (91 octane or higher) fuel only
  • Due to multiple powertrain calibrations, online registration is required to receive ProCal calibration delivery tool after purchase.
  • Ford Racing does not ship ProCal tools directly overseas. Customers must make special arrangements with their Ford Racing Distributor.
  • Powertrain calibrations are developed and supported for U.S. and Canadian vehicles only

2010 MUSTANG V6 FORD RACING PERFORMANCE CALIBRATION WITH HIGH FLOW K&N AIR FILTER

M-9603-MV6|$339
  • Fits 2010 Mustang V6 with Automatic or Manual Transmission. For 2005-2009 Mustang V6 see M-9603-V605
  • Approximate increase of 12 peak hp / up to 13 lb-ft over stock
  • Kit includes:
    • Ford Racing ProCal tool with performance calibration for significantly improved throttle response and performance feel
    • 2005-2010 Mustang V6 High-Flow K&N Air Filter M-9601-MV6
  • Premium (91 octane or higher) fuel only
  • Due to multiple powertrain calibrations, online registration is required to receive ProCal calibration delivery tool after purchase.
  • Ford Racing does not ship ProCal tools directly overseas. Customers must make special arrangements with their Ford Racing Distributor.
  • Powertrain calibrations are developed and supported for U.S. and Canadian vehicles only

2005 – 08 MUSTANG V6 MUSTANG POWER UPGRADE PACKAGE

M-2007-FR1V6 $949.00
Fits 2005-09 V6 Mustang with manual or automatic transmission.

Kit includes:
• 85mm Cold Air Kit M-9603-V605
• Dual Exhaust Kit with X-Pipe M-5230-V6
• Performance Oil Filter

Approximate increase of 10 horsepower

MUSTANG V6 COUPE HANDLING PACK

M-FR3-MV6A 2011 V6 $1195.95

• Handling Pack includes Dampers(M-18000-A), Lowering springs (M-5300-N), Anti-roll bar kit (M-5490-C) and Strut tower brace (M-20201-F).
• All components are designed to work together as a package
• Lowers car approximately 1.250″
• Dampers are manufactured by Dynamic Suspensions. (the same company that makes dampers for the FR500C race car)
• Note:Some factory fasteners are one time use. Please reference a Ford service manual for reuse information and correct torque specifications.

 

2005-2009 MUSTANG V6 SHORT THROW SHIFTER

M-7210-MV6  2005-2009  $289.00
• Designed by Ford Racing and Hurst
• Teflon bearing with unique shifter rod and OE main stamping
• Chrome stick “Ford Racing” white shift knob
• Includes jam nut
• Urethane body vibration isolators
• Reduced throw

2005-09 MUSTANG V6 MUFFLER KIT

M-5230-5V6 $199.00
• T-304 stainless construction
• Louder, “throatier” exhaust note
• 50 state drive-by noise legal
• Includes muffler with Ford Racing embossed 3.5″ exhaust tip

2010 MUSTANG V6 MUFFLER (50 State)

M-5230-MV61 |$350
• For 2010 Mustang V6
• T-304 stainless construction
• Louder throatier exhaust note
• Includes mufflers with Ford Racing embossed 3.5″ exhaust tips
• 50 state pass by noise legal

2005-09 MUSTANG V6 DUAL EXHAUST KIT

M-5230-V6 $679.00
• Fits 2005-09 V-6 Mustang
• 409 stainless body mufflers with highly polished 4.0″ diameter tips
• Louder, “throatier” exhaust note
• Includes X-pipe
• Requires minor modification of rear bumper cover

Note: 409 stainless exhaust material is titanium stabilized ferritic stainless steel. 409 stainless is used in applications where appearance is a secondary consideration to mechanical properties and corrosion resistance and where some weldability is required. An example of 409 stainless usage is catalytic converter assemblies. 409 stainless has excellent forming characteristics and is rust through resistant. A surface rust will form in most instances. This rust retards further corrosion.

2010 MUSTANG V6 DUAL EXHAUST KIT (50 STATE)

M-5230-MV62 $895
• Fits 2010 Mustang V6
• Includes Mustang FR500S Performance Mufflers embossed with Ford Racing logo
• Black powdercoated aluminized 409 stainless steel corrosion-resistant body with polished 304 stainless 3.5″ diameter tips
• Includes X pipe
• Louder, throatier exhaust note
• Includes 2010 Mustang GT rear lower valance, black, for dual exhaust
• 50 state pass by noise legal
409 stainless is a blend of stainless and mild steel. This type of stainless is used to make production catalytic converter assemblies that have a 100,000 mile durability requirement. 409 stainless has excellent forming characteristics and is rust through resistant. 409 stainless will develop a light surface rust.

2005 - 10 MUSTANG V6 COUPE SPRINGS

M-5300-N $200.00
• Engineered specifically for improved handling on the 2005-10 V6 Mustang Coupe
• Lowers car approximately 1.5″
• Designed to be used with M-18000-A and M-5490-C
• Gives a more aggressive looking stance as well as increased handling dynamics
• May cause slightly harsher ride compared to stock springs
NOTE: Some factory fasteners are one time use. Please reference a Ford service manual for reuse information and correct torque specifications.

FORD RACING HIGH PERFORMANCE OIL FILTER

M-6731-FL820  $159.00
• Synthetic-Polymer/Cellulose-Fiber blend media
• Heavy-gauge base and canister for higher burst strength and impulse fatigue resistance
• High quality silicone anti-drain back valve
• Non-stick sealing gasket for ease of installation and removal
• Long life with standard and synthetic motor oils
• Up to 50% more filtering capacity than standard filters
• Improved filtering efficiency
• This technology is only available through Ford Racing Performance Parts

2005-10 MUSTANG V6 COUPE ANTI-ROLL BAR KIT

M-5490-C $425.00
• Anti-roll bar kit designed for increases handling and performance on the 2005-10 V6 Mustang Coupe
• Best when used with M-5300-N springs
• Includes all mounting hardware
NOTE: Some factory fasteners are one time use. Please reference Ford service manual for reuse information and correct torque specifications.

2005-09 85 MM COLD AIR KIT WITH PREMIUM CAL

M-9603-V605 $449.00
• Fits 2005-09 Mustang V6 manual or automatic transmission.
• Significant performance gains
• Premium fuel only
• Kit includes 85mm aluminum mass air meter
• Mounts in location of stock airbox

2010 MUSTANG V6 FORD RACING PERFORMANCE CALIBRATION WITH HIGH-FLOW K&N AIR FILTER

M-9603-MV6 $339 
• Fits 2010 Mustang V6 with automatic or manual transmission
• Approximate increase of 12 peak hp/up to 13lb-ft over stock
• Kit Includes:
Ford Racing ProCal tool with performance calibration for significantly improved throttle response and performance feel
2005-2010 Mustang GT High-Flow K&N/Ford Racing Air Filter

2005-2010 MUSTANG V6 HIGH-FLOW K&N AIR FILTER

M-9601-MV6 $48.75
• Fits 2005-2010 Mustang GT airbox
• Flows approximately 22% more than stock filter at 1.5″ H2O delta pressure
• K&N 4-ply panel washable air filter

2005-10 MUSTANG COUPE DYNAMIC DAMPER KIT

M-18000-A $589.00
• Engineered specifically for improved handling on the 2005-10 Mustang Coupe
• Dynamic suspension dampers, same manufacturer as Mustang FR500C race car
• Unique FRPP performance tune
• Designed specifically for lowered vehicles
• Mustang V6 Coupe owners: Use with M-5300-N and M-5460-C for optimum performance
NOTE: Some factory fasteners are one time use. Please reference Ford service manual for reuse information and correct torque specifications.

2005-10 MUSTANG V6 STRUT TOWER BRACE

M-20201-F $219.00
• Fits the 2005-10 Mustang V6
• Parallel beam construction for added rigidity