Specials

Coyote Blocks

Coyote Blocks
Sort By:
Show:
Display: List Grid
  • 2017 MUSTANG 5.0L COYOTE LONG BLOCK
    M-6006-M50A
    The Ford Performance all-aluminum 2017 5.0L Coyote crate engine is a modern 5.0L 32-valve DOHC V-8 that uses advanced features like Twin Independent Variable Camshaft Timing (Ti-VCT) to deliver 435 horsepower @ 6500 rpm and 400 ft.-lb.+ of torque @ 4250 rpm (with premium fuel). The lightweight aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for b..
    $5,850.00
  • 5.0L CAST IRON MODULAR BOSS CYLINDER BLOCK
    M-6010-BOSS50
    The Boss 5.0 block is a 4.6L deck height, 94mm cylinder bore cast iron block. The block uses a proprietary iron mix to yield the strongest possible casting strength with the least porosity and greatest consistency. NOTE: The Boss 5.0L  modular block does not have a finish milled head deck surface and the cylinder bores are rough honed.  Siamese 94mm b..
    $1,850.00
  • 5.0L COYOTE ALUMINATOR NA SHORT BLOCK
    M-6009-A50NAA
    Just like the fully built up engines, Aluminator Short Blocks are hand assembled and use Manley connecting rods with ARP rod bolts and Mahle® forged pistons.  Two versions are available – 9.5: and 11.0:1 compression ratio.  These Aluminator Short Blocks serve as a strong foundation for the enthusiast that wants to spec and finish a Coyote build to his or her particular application..
    $5,995.00
  • 5.0L COYOTE ALUMINATOR SC SHORT BLOCK
    M-6009-A50SCA
    Just like the fully built up engines, Aluminator Short Blocks are hand assembled and use Manley connecting rods with ARP rod bolts and Mahle® forged pistons.  Two versions are available – 9.5: and 11.0:1 compression ratio. These Aluminator Short Blocks serve as a strong foundation for the enthusiast that wants to spec and finish a Coyote build to his or her particular application..
    $5,995.00
  • 5.0L COYOTE ALUMINUM PERFORMANCE BLOCK
    M-6010-M50R
    Special casting of the 5.0L Coyote block with improvements to support higher horsepower engine builds Water jacket below cylinder bore has been updated to add more material for strength The intake side of the bore at the deck surface includes a cast in brace to improve strength of the cylinder wall and head gasket sealing 1/4-inch drain plug provision on right si..
    $2,995.00
  • 5.0L COYOTE LONG BLOCK GEN 1
    M-6006-M50A1
    The Ford Performance 5.0L Coyote crate engine is a modern 4-valve DOHC V-8 that delivers 435 HP - pulls to 7,000 RPM, and is happy cruising along at highway speed.  The 2015 model year marks the first major design changes for the 5.0L Coyote engine.    To help distinguish between the “old and new” engines the Gen 1 and Gen 2 designations will be used • GEN 1 ..
    $7,400.00
  • 2015 5.0L COYOTE PRODUCTION CYLINDER BLOCK
    M-6010-M504VB
    2015 Mustang GT 5.0L Coyote production aluminum block Low pressure cast 319 aluminum Pressed-in thin-wall iron liners 92.2 mm bore size Block uses 11 MM head bolts Cross-bolted nodular iron main bearing caps  Block has provisions for piston oil squirters, use M-6026-A50A not included Includes dowels and plugs NOTE: The 2015 block has..
    $1,599.00
  • 5.2L COYOTE ALUMINUM CYLINDER BLOCK
    M-6010-M52
    Original equipment for the 2016 Shelby Mustang GT350 94.0 mm bore Special high-performance casting of the Coyote block with improvements to support higher horsepower engine builds Water jacket below cylinder bore has been updated to add more material for strength The intake side of the bore at the deck surface includes a cast-in brace to improve strength of the cylin..
    $3,059.00
  • COYOTE 5.2L FORGED CRANKSHAFT
    M-6303-M52
    Finish machined cross plane forged steel crankshaft for use with the M-6010-M52 Coyote block 93 mm stroke Standard main and rod journal sizes  Will require balancing  ..
    $1,125.00
  • MUSTANG GT 5.0L COYOTE PRODUCTION ALUMINUM CYLINDER BLOCK
    M-6010-M504V
    Mustang GT 5.0L 4V Coyote production aluminum block Fits 2011-2014 Mustang, will not fit 2015 Low pressure cast 319 aluminum Pressed-in thin-wall iron liners 92.2 mm bore size Cross-bolted nodular iron main bearing caps  Block features 11mm cylinder head bolts (2011-2012 engine builds using this block will require 11 mm head bolts) Block h..
    $1,579.00