Specials

1996-2004 Mustang

1996-2004 Mustang
Sort By:
Show:
Display: List Grid
  •  1979-2004 Ford Mustang 2" x 3" Coyote Swap 5.0L
    10502600
    2" x 3" Stainless Steel Long Tube Headers For use with 5.0 Coyote motor Can use OEM starter Must be used with and UPR, Team Z, or RaceCraft K-Member May work with other K-Members but may require modifications Due to the design of this product some applications may require the use of a Flaming River Steering Shaft Gaskets and all installation hardware incl..
    $1,195.00
  • 1996-2004 MUSTANG CLUTCH RELEASE LEVER
    M-7515-A
    Fits 1996-2004 V8 Mustang Stock replacement clutch release lever Can be used with bellhousing M-6392-M46 Can be used with HD throwout bearing M-7548-A ..
    $69.00
  • 4.6 Rotating Assembly
    46RA
    Full rotating assembly kit for 4.6 engines including Manley forged pistons and H-beam rods, forged steel crankshaft, SHM moly piston rings, Federal Mogul rod bearings, and Federal Mogul main bearings. The quality doesn’t get better than this for aggressive street or moderate race applications up to 650 hp, 7000 rpm. Pistons available in standard size or oversize 0.020” or 0.030”, and flat top o..
    $2,194.95
  • 4.6L/5.4L 3V IGNITION COIL SET
    M-12029-3V
    Direct replacement for 4.6L and 5.4L 3V engines equipped with 8L3E coils. Fits Mustang 4.6L and 5.4L 3V engines with 12mm spark plugs.  Does not fit 3V heads with "High Thread" design spark plugs. Required when installing Ford Racing heads M-6049-463VP3, M-6049-N3V, M-6049-N3VPA and M-6050-463VP3, M-6050-N3V, M-6050-N3VPA on 2005-2007..
    $290.00
  • 4.6L/5.4L 4V Ford Racing Cast Coil Covers
    M-6067-D
    Fits most 4.6L/5.4L DOHC engines with coil on plug ignition Polished die-cast aluminum Features two-color Ford Racing logo ..
    $259.00
  • 8.8" 3.08 RING GEAR AND PINION
    M-4209-88308
    Ford Racing 8.8" Gear Sets No one does 8.8" gears better than Ford Racing….stronger and quieter. The 8.8" rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing is the manufacturer of choice when it's time to hop-up your axle. Made in the United States at Ford's Sterling Axle Plant (competitors in our price range are prim..
    $219.00
  • 8.8" 3.27 RING GEAR AND PINION
    M-4209-88327
    Ford Racing 8.8" Gear Sets No one does 8.8" gears better than Ford Racing….stronger and quieter. The 8.8" rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing is the manufacturer of choice when it's time to hop-up your axle. Made in the United States at Ford's Sterling Axle Plant (competitors in our price range are prim..
    $219.00
  • 8.8" 3.31 RING GEAR AND PINION
    M-4209-88331
    Ford Racing 8.8" Gear Sets No one does 8.8" gears better than Ford Racing….stronger and quieter. The 8.8" rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing is the manufacturer of choice when it's time to hop-up your axle. Made in the United States at Ford's Sterling Axle Plant (competitors in our price range are prim..
    $219.00
  • 8.8" 3.55 RING GEAR AND PINION
    M-4209-88355
    Ford Racing 8.8" Gear Sets No one does 8.8" gears better than Ford Racing….stronger and quieter. The 8.8" rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing is the manufacturer of choice when it's time to hop-up your axle. Made in the United States at Ford's Sterling Axle Plant (competitors in our price range are prim..
    $219.00
  • 8.8" 3.73 RING GEAR AND PINION
    M-4209-88373
    Ford Racing 8.8" Gear Sets No one does 8.8" gears better than Ford Racing….stronger and quieter. The 8.8" rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing is the manufacturer of choice when it's time to hop-up your axle. Made in the United States at Ford's Sterling Axle Plant (competitors in our price range are prim..
    $219.00
  • 8.8" 4.10 RING GEAR AND PINION
    M-4209-88410
    Ford Racing 8.8" Gear Sets No one does 8.8" gears better than Ford Racing….stronger and quieter. The 8.8" rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing is the manufacturer of choice when it's time to hop-up your axle. Made in the United States at Ford's Sterling Axle Plant (competitors in our price range are prim..
    $219.00
  • 8.8" 4.56 RING GEAR AND PINION
    M-4209-88456
    Ford Racing 8.8" Gear Sets No one does 8.8" gears better than Ford Racing….stronger and quieter. The 8.8" rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing is the manufacturer of choice when it's time to hop-up your axle. Made in the United States at Ford's Sterling Axle Plant (competitors in our price range are prim..
    $279.00